|
Analog 2/3 in X-ray Camera with a 16 to 50mm Fiber
Taper Scintillation Surface with a variable thickness
Gadolinium Oxysulphide (GdOs) scintillation layer. Perfect
for inexpensive inspection instruments where cost is
a factor.
The Fiber Cam represents a new way to capture
X-ray images with standard analog CCD sensors.
The Fiber Cam is a standard 2/3" monochrome CCD
Camera with a fused fiber optic bundle that is attached
directly to the image sensor with proprietary technology.
It is designed for OEMs who wish to use a standard
camera with X-Ray sources. Using this technology
the sensor is at least 1/2" away from the sensor
and will thus reduce the rate of sensor deterioration.
This camera is based on the industry standard Hitachi
KP-M1AN. Camera specs are therefore the same. Our scintillation
layer is applied directly to the surface of the fiber-optic
coupler for maximum efficiency . The thickness of the
layer can be adjusted and its preparation is our proprietary
technology. This layer is very sensitive to scratches
and thus the camera ships with a thin aluminum cover
plate. |
