| A cost effective camera kit which includes a Euresys Grablink Value frame grabber with a Hitachi
Mega-pixel and Progressive Scan camera with near-IR sensitivity
A Camera Link based, Mega-pixel and Progressive Scan capture system with near-IR sensitivity. The KP-F120CL provides frame rates of 30, 60 and up to 120 fps (in Partial Scan Mode) and a spectral response extending above 1000 nm.
For use in high performance machine vision systems, the camera features a Frame-on-Demand mode that allows an image to be captured and output immediately following the use of a trigger pulse.
|
Euresys Grablink Value Datasheet
Hitachi Hitachi KP-F120Cl Datasheet |
| Hitachi KP-F120Cl Features: |
Features- 2/3" 1.45 Million Pixel CCD
- Near IR Sensitivity
- Spectral Response Extended Beyond 1000 nm
- 30, 60 or 120 fps
- Progressive Scan with Square Pixels
- Camera Link Output
- Multi-step Electronic Shutter
- Partial Scan Mode
- Frame-on-Demand Mode
- Lens Mount Type: C-Mount
- Compact Size
Read More-> Hitachi KP-F120Cl Datasheet |
| Euresys Grablink Value Standard Features: |
Features
- Recommended for single-camera systems
- Base Configuration
- 24 Bits at 60 Mhz
- 8-Mbyte On Board Memory
- Grablink Value PCI has a 32-bit 33 MHz PCI conventional bus
- Grablink Value cPCI benefits from a 64-bit 66 MHz cPCI bus
- Includes MultiCam Driver Software (Free Lifetime Upgrades)
- Support of the Base configuration
-
Picolo Tetra is able to simultaneously digitize four video signals and to send the resulting digital data in real time into the PC memory through the PCI bus. The video streams issued from four cameras are displayed and/or recorded in parallel.
| |
Monochrome or Bayer |
Color RGB |
CAMERA
COMPATIBILITY |
single-tap |
dual-tap |
single-tap |
| Tap configuration |
Base_1T8, Base_1T10, Base_1T12, Base_1T14, Base_1T16 |
Base_2T8, Base_2T10, Base_2T12 |
Base_1T24 |
| Camera Link configuration |
1 tap x (8-10-12-14-16 bits) |
2 taps x (8-10-12 bits) |
1 tap x (24 bits) |
- On board memory
-
The Grablink Value incorporates 8-Mbyte on board memory. Used as a huge image FIFO, it is clocked at 80 MHz and provides a peak bandwidth of 3 20 Mbytes/s.
- I/O lines
- The Grablink Value is fitted with a female DB9 connector. It implements the trigger and strobe facilities offered by the MultiCam driver. System components such as motion encoders benefit from isolated I/O lines and power supply.
-
Read More-> Euresys Grablink Value Datasheet |
|
|
