NEW

KP-D590

• 1/2 inch format High Sensitivity DSP Color Camera
• Illumination range from 0.001 to 100,000 lux
• Thermoelectric Cooling for the CCD
• Digital Noise Reduction
• AES, BLC, ATW, and AGC functions
• RS-232 Remote Control for all Camera Functions

KP-D531

• High sensitivity color camera
• Light levels from 0.02 to 100,000 lux
• Electronic Zoom Function
• 1/2 inch format High Sensitivity DSP Color Camera
• Illumination range from 0.02 to 100,000 lux
• Thermoelectric Cooling for the CCD
• Digital Noise Reduction
• AES, BLC, ATW, and AGC functions
• RS-232 Remote Control for all Camera Functions

KP-D591

• 1/2'' High Sensitivity DSP CCD Color Camera
• Useable at Levels from 100,000 lux to 0.01 lux
• 480 TV Lines of Resolution, 50db S/N
• Integration Mode with Built-In Field Memory
• Thermoelectric Cooling of the CCD
• Electronic Shutter with AES function
• Backlight Correction and Digital Noise Reduction Mode
• Auto Tracking and Manual White Balance Modes
• RS-232C Remote Control
• Digital Signal Processing Camera
• 480 TV lines of Resolution, 50 db S/N
• Illumination Range from 0.01 to 100,000 lux
• Built in field memory
• Cooled CCDs
• Digital Noise Reduction

KP-M2R

• Sensitivity in the Near-Infrared Spectrum
• 1/2" Microlens IT CCD Camera
• 570 TV Lines of Resolution, 56 db S/N
• Sensitivity of 0.3 Lux at f1.4
• Field-on-Demand or Restart / Reset Function
• Frame or Field Integration Mode
• Multi-Step Electronic Shutter Function
• Selectable Gamma, and AGC

KP-D70

• 1/3'' Wide Dynamic Range Color DSP Camera
• 120 X Dynamic range compared to Standard Camera
• Dual Exposure and Dual Auto White Balance
• 480 TV Lines of Resolution, 50db S/N
• Sensitivity of 1.5 lux at f1.2
• Dual Digital Signal Processing
• Backlight Compensation and Electronic Shutter Modes
• RS232C Remote Control

KP-200

• 1/2'' High Sensitivity Monochrome CCD Camera
• 570 TV Lines of Resolution, 48db S/N
• Sensitivity of 0.0002 lux at f1.4
• Spectral Response above 1000 nm
• Electronic Shutter with AES function
• Auto Gain Control Function
• Output for Auto Iris Lenses
• Selectable Gamma

PT50SDI

• Quiet Operation Using High Torque Stepper Motors
• Serial RS-485 or RS-232 Control
• Adjustable Preset Speeds with Proportional Speed Control
• Adjustable End Stops
• Supplies 12 Volt DC Power for Camera Operation
• Optional Camera Control Module for Full Camera Control

• Quiet Operation Using High Torque Stepper Motors
• Serial RS-485 or RS-232 Control
• Adjustable Preset Speeds with Proportional Speed Control
• Adjustable End Stops
• Supplies 12 Volt DC Power for Camera Operation
• Optional Camera Control Module for Full Camera Control

KP-101 Indoor pan and tilt head

• Pan/tilt range 358 degrees
• Pan/tilt speed 0 to 20 degrees per second, variable
• Preset accuracy plus or minus .083 degrees
• Worm gear drive with high torque motors
• Complete control of camera menu available
• Built in 12V camera power supply
• Windows based control software available
• Multipin connector for ease of power and control hookup

PT-E-300

• Pan range 270 degrees
• Tilt range 180 degrees
• pan and tilt speed 0 to 25 degrees per second
• Worm gear drive with high torque motors
• Windows based software available
• Complete control of camera menu systems
• Compatible with other control systems
• Pre-wired camera control/power harness supplied with each system

PT-C55

• Compact Pan/Tilt Controller
• Controls up to 8 Pan/Tilt Heads
• Stores 20 Presets per Head

• Proportional Speed Control for

  Pan/Tilt

• Proportional Speed for Zoom/Focus
• Option for Complete Camera Control

• Quick access to camera “paint”

  controls

Download Specifications (PDF Files)

PT-CC

• Eagle system compatible
• On board microprocessor controlled
• Convenient desktop form factor
• Bright red LEDs for user feedback of system status
• When used in conjunction with optional PT-C pan-tilt controller, the combination provides complete camera and pan-tilt system control
• Use of EPROMs allow easy future software upgrades
• Can control up to 32 cameras on one RS-485 control chain
• DB-9 connector on rear allows for simple connection to PT-C controller
• All needed connectors are included
• The Eagle PT-CC camera controller is a multi-functional control unit. It allows the user to control up to 32 different cameras attached to Eagle pan-tilt heads, from one controller.
• The PT-CCs compact desktop case allows it to easily be integrated into new or existing control room applications.
• The PT-CC uses individual control buttons, with excellent tactile feedback. All of the main setup features for Hitachi's HV-C10, HV-D15, HV-D3, Z-2010 and Z-3000 cameras are available to the user.

PT-C

• Eagle system compatible
• On board RISC microprocessor controlled
• Convenient desktop form factor
• Proportional digital joysticks for control of pan-tilt direction, lens zoom and focus functions
• Two line backlit liquid crystal display for user feedback of system status
• Vector solving operation when recalling preset positions
• When used in conjunction with optional PT-CC camera controller, the combination provides complete camera and pan-tilt system control
• Recall of 64 presets per head from control panel
• Use of EPROMs allow easy future software upgrades
• Can control up to 16 pan-tilt heads on one RS-485 control chain
• DB-9 type controllers on rear allow for simple connection of control line
• All needed connectors are included
• Includes 12VDC transformer power supply