ImageOps A Technical Solution Oriented Source with a Deep Understanding of Video and Imaging
San Diego, California
Phone: (858) 613-1818

Site Search
| HOME | PRODUCTS | CONSULTING | COMPANY | NEWS | ORDER | EQUIPMENT RENTALS | SUPPORT | LINKS | CONTACT

Home - Networking & Storage - Fiberoptic Video Transmission - The high-performance, low-cost, complete fiber optic video link

The high-performance, low-cost, complete fiber optic video link


Beamer-VTM is a high-quality, low-cost fiber optic video transmission system designed to transmit color or black and white video signals at distances that can vary from a few feet to more than a mile. The system transmits over standard multimode fiber and is ideal for both indoor and protected outdoor applications, including security, videoconferencing, CCTV and medical monitoring. Beamer V (3150)

 

Beamer-VTM is compatible with all analog video standards, including NTSC, PAL and SECAM, and will operate with all 62.5 micron multimode fiber optic cable and industry standard ST type optical connectors.

 

The flexible system is available as dual channel transmitter and receiver card versions, or in a single channel box version that can be purchased as a complete system. The units are easily and quickly installed with just a simple screwdriver and are designed for long, trouble-free operation. Immunity to the effects of electrical interference, ground loops, explosive and hazardous environments, water and high voltages make Beamer-VTM a superior low-cost alternative to coax cable.

 

Communications Specialties also offers multimode fiber optic cable for use with the Beamer-VTM system. Cable must be purchased separately.


Standard Features

 

  • Complete system includes transmitter, receiver and two power supplies
  • Simple to install
  • Easy to use
  • High performance
  • Low price

 

 

 

Applications

 

  • Security systems; indoor and outdoor
  • CCTV
  • Military surveillance
  • Videoconferencing
  • Scientific observation
  • Medical monitoring

 

 

SPECIFICATIONS

 

Equipment Included Transmitter, Receiver, Two power supplies, User's manual
Input/Output Voltage 1 volt pp (user adjustable at receiver)
Input/Output Impedance 75 Ohms
Signal/Noise Ratio (per RS-250) 52 dB minimum
Differential Gain (per RS-250) 2% typical
Differential Phase (per RS-250) 1° typical
Optical Wavelength 850 nanometers
Optical Cable and Connectors 62.5 micron multimode fiber with industry standard ST
Optical Loss Budget 12 dB minimum
Transmission Distance 0 to 1.5 mile typical
Operating Power (per unit) 12 V ± 10% DC @ 100 ma maximum
Operating Temperature 35 to +75 degrees C
Physical size (per unit) 3 1/4" L x 2 3/8" W x 1" H
Beamer-V comes with two 115 VAC to 12 VDC plug-in wall adapters which may be used to supply all operating power.

 

Download data sheet (PDF)

 

|
Consulting
|
|
|
|
News
|
|

 

ImageOps, Division of Computer Modules, Inc.
11409 West Bernardo Court * San Diego, CA 92127 Phone: (858) 613-1818 * Fax: (858) 613-1815
© 2003-2011 ImageOps.com. All rights reserved.